Just three or four years ago, the dream of many vapers was a box mod with 200 watts of power and a serviceable tank for two spirals, which were almost always wound independently. But not so much time has passed, and vapers’ priorities have changed a lot. PODs and sub-mods are now considered the standard, and the second category has successfully replaced box mods, in particular “single-tank” mods, for many vapers. One of the leaders vape market is rightly considered a company Voopoo, whose success story actually began with the release of the now legendary Drag box-mod. The developers have repeatedly released devices in different formats Drag lineup, and successfully, but it does not mean that they stopped in search of perfection, so there was presented a new sub-mod VOOPOO Drag H80 S POD kit.
General information
VOOPOO Drag H80 S POD kit is a medium sized submod designed to fit one 18650 battery, equipped with GENE.TT 2.0 chip and designed to use PnP series vaporizers. The design of the new sub-mod can hardly be called innovative and original – similar devices have been already released a lot not only by other manufacturers, but also by Voopoo. At the same time the device has good ergonomics, sits well in your hand, although it is difficult to call it miniature. Thanks to GENE.TT 2.0 chipset, the vaper will get not only good performance, but also several standard modes. The manufacturer decided to revisit one of the most popular series of vaporizers PnP, while expanding the line with several new options. You can buy VOOPOO Drag H80 S POD kit in six colors – dark red, carbon gray, red, brown, gold and black.
Equipment
The device is packed quite decently – in the box the vaper will find everything to be able to use the device immediately after purchase for its direct purpose – steaming delicious and flavorful liquids. The package includes:
– DRAG H80 S battery pack device;
– PNP Pod II cartridge (4.5ml);
– Vaporizer PNP TW30 (0.3ohm) coil;
– PNP TW15 (0.15ohm) coil vaporizer;
– USB Type-C cable;
– User manual.
DRAG H80 S battery pack device
If you ask vapers what devices they know Voopoo, in 90% of cases you will hear the answer Drag, and it can be any Drag – box mod, submod or POD-system. This series is rightfully considered one of the most famous and popular, and for good reason – devices with this name are notable for performance, versatility and reliability. But the developers at Voopoo do not get their paycheck for nothing – they are constantly working on new devices, even if they will be quite similar to those released earlier. One example of this is the VOOPOO Drag H80 S POD kit, another reincarnation of the Drag, but in sub-mod format.
To say that VOOPOO Drag H80 S POD kit made in an original design, can not be, because its form factor is already well known to many – it’s a rectangular device with a semicircular one side and a straight second. The semicircular side is covered by this leather, so the device sits perfectly in your hand, and the straight side is actually a control panel. You can not say that the device is very compact, because its dimensions are 123*32*26 mm. The body is made of zinc and aluminum alloys, so the submod weighs 122 grams.
The pod-mod is powered by a traditional 18650 battery, which is installed under the side cover (the same one that is semi-circular with an eco-leather insert), held by fairly strong magnets. If necessary, the battery can be charged using the USB Type-C connector, located under the “+/-” buttons, with a current of 2A.
It will hardly be a surprise for some vapers that VOOPOO Drag H80 S POD kit is controlled by GENE.TT 2.0 chipset, which gives the vaper three modes – Smart/RBA/ECO and a maximum power of 80 Watts. The device is equipped with a color display, where you can find a standard set of information about the work of the device.
PNP Pod II Cartridge
Especially for the new sub-mod the new sub-tank was also developed, distinguished by the simplicity of maintenance and versatility. The cartridge is held in the battery pack by magnets. The cartridge is equipped with a non-removable round drip-tip.
The cartridge PNP Pod II is designed for the most complete and well-known line of vaporizers PnP, which is easy to buy in any vape shop. The sub-mod comes with a couple of new vaporizers with 0,15 and 0,3 ohm resistance on the grid, thanks to which the taste and the flavor will be at the highest level.
The blowing adjustment is done by simply turning the cartridge in the battery box, but you should be prepared for a tight MTL draw to be quite difficult.
To refill the cartridge you just unscrew the top cap with the built-in drip tip and pour in 4.5 ml of liquid.
Conclusions and Impressions
On the background of a large number of submods released by Voopoo and other manufacturers, Drag H80 S POD kit does not particularly stand out, as there are hundreds of similar devices already available. But at the same time this pod-mod will please you with its autonomy, functionality and practicality, and it can easily replace a good vaper’s “single tank”.
Advantages and disadvantages
Disadvantages
– Achieving MTL tightening is difficult;
– Rather large weight;
– Possible leakage in the vaporizer area.
Advantages
– Ergonomic body;
– Original design;
– Removable battery;
– Fast charging;
– High-performance chipset;
– Good functionality;
– Large cartridge capacity ;
– Use of PnP vaporizers;
– Convenient refilling;
– Adjustable blow-off.
