Among the large range of vape devices, devices a la iJust have been in particular demand for years. Their popularity is due to several weighty arguments: they are as easy to use as possible, do not require additional purchase of batteries and charger. At the same time they are equipped with simple cards that work in automatic mode, which allows you to set the optimal power depending on the spirals used. The devices of such format are available in the range of almost all manufacturers, and Innokin company also decided to release a device of such format – Zlide Tube Kit. It’s worth saying that this starter kit was developed by Innokin specialists together with quite famous European reviewers Phil Busardo and Dimitris Agrafiotis, thanks to which it takes into account the traditional wishes of vapers. It can’t be said that this starter kit is designed only for beginners, it’s perfect for vapers with experience as well.
General Info
Innokin Zlide Tube Kit is a compact starter kit, consisting of a tube mod with built-in battery and ZLIDE MTL Tank atomizer, designed for tight cigarette puffs and working on interchangeable vaporizers. The device is made in the format of a classic pipe-mod, so no special questions and claims to its use and ergonomics will not arise. The complete atomizer was designed specifically for tight MTL draw, and the vaper has the ability to adjust it. The tank does not use traditional spirals, as it is designed to fit Zenith Z-Coil series interchangeable vaporizers. The Innokin Zlide Tube Kit is available in six colors in steel, spiral, pink, blue, forest camo, and black.
Kit
As with most devices of this format, this starter kit is completed almost as standard, but the vaper will not experience difficulties with its use and maintenance. That’s why in the box the vaper will find:
Zlide Tube Battery Pack;
Zlide Tank Atomizer;
Innokin Zenith Z-Coil 1.2ohm Atomizer Head (pre-installed);
Zenith Z-Coil 0.8ohm Atomizer Head;
Replacement Glass;
O-ring set;
USB charging cable;
Warranty card;
User’s Manual.
Zlide Tube Starter Kit Battery Pack
If a vaper expects something special or supernatural from Zlide Tube, he is very much mistaken, because it is difficult to get something non-standard from a rather traditional pipe mod. Yes, Zlide Tube battery pack is one of the interpretations of pipe mods, which is not distinguished by special refinement, decor or functionality.
The diameter of the device is 22 mm, which is quite logical and understandable. Thanks to this diameter, the device is compact and easy to use.
The maximum power at which the tube-mod operates is 80 watts, and it is provided by the built-in 3000 mAh battery, which is quite a good indicator for a device of this format. The battery is charged using a standard micro-USB connector, located on the side of the device (on the opposite side from the fire button), with 1A current.
The only control element of the Zlide Tube is the Fire button, made in the form of a small shield, located in the center of the device. Around the button there is a LED ring that changes its color depending on the battery level, during charging or activation.
Zlide Tank Atomizer
A lot of manufacturers have presented vaping tanks for tight cigarette puffs, but most of them are atomizers with a serviced base. Innokin decided to release the Zlide Tank, which uses interchangeable vaporizers. It should be said that this solution has an important advantage: the vaper does not need to spend time on the installation of the coil, burning it, stacking absorbent cotton, just replace the old vaporizer with a new one.
Zlide Tank uses Z-Coil Line vaporizers, which are installed in the Zenith tank, which is quite famous for many vapers of this manufacturer. They are made on the grid and on regular spirals, and have a resistance of 0.48 and 1.6 ohms, respectively. The manufacturer emphasizes the fact that thanks to these vaporizers you can use liquids, both organic and salt nicotine. A vaper can install not only complete vaporizers, but also one of the five options offered by the company.
The tank is designed for relatively tight puff, which is adjusted by turning the ring at the bottom of the atomizer. Depending on the preference of the vaper, you can open the required number of holes of different diameters.
The filling of the tank will not cause any difficulties or questions you need to take out the 510 drip-tip, pull back the top cap in a straight line and pour into a large enough hole 2 or 4 ml of liquid, depending on the version.
Conclusions and impressions
Innokin Zlide Tube Kit is quite an interesting and versatile starter kit that will suit not only beginners, but also vapers with experience. It is very easy to use, reliable and does not require any special skills in terms of maintenance, and at the same time it will allow you to get quite a decent tight puff.
Advantages and disadvantages
Disadvantages
Weak charging current;
Lack of adjustment mode of the voltage supplied to the evaporator.
Advantages
Compact size;
A long-life rechargeable battery;
510 connector;
Large selection of vaporizers;
510th drip tip;
Full-fledged cigarette puff with adjustment;
Convenient refueling;
Decent taste.
